Procom WAN18N-2 Installation Guide

Browse online or download Installation Guide for Fireplaces Procom WAN18N-2. ProCom WAN18N-2 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
PC-WAN18-1203
Questions about installation, operation, or troubleshooting? Before returning to
your retailer, call customer service department toll-free at (877)886-5989.
VENTED NATURAL GAS LOGS
MODEL #WAN18N-2 WAN24N-2
WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL
INJURY, OR LOSS OF LIFE.
– Do not store or use gasoline or other ammable vapors and liquids in vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas
suppliers instructions.
If you cannot reach your gas supplier, call the re department.
– Installation and service must be performed by a qualied installer, service agency
or the gas supplier.
This appliance may be installed in an aftermarket, permanently located manufactured (mobile)
home, where not prohibited by local codes. This appliance is convertible for use with propane/
LP gas by using the MANUAL ON/OFF VALVE/SAFETY PILOT KIT (see ACCESSORIES on
page 11).
This is a gas-red appliance. It uses air (oxygen) from the room in which it is installed.
Provisions for adequate combustion and ventilation air must be provided. Refer to Air For
Combustion and Ventilation section on page 5 of this manual.
CAUTION - FOR YOUR SAFETY
INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual
for future reference.
Page view 0
1 2 3 4 5 6 ... 16 17

Summary of Contents

Page 1 - VENTED NATURAL GAS LOGS

PC-WAN18-1203Questions about installation, operation, or troubleshooting? Before returning to your retailer, call customer service department toll-fre

Page 2

10OPERATIONFOR YOUR SAFETY READ BEFORE LIGHTING BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the oor because

Page 3 - IMPORTANT SAFETY INFORMATION

11CARE AND MAINTENANCE● Keep the area around the log set clean and clear of debris.● Occasionally, you may use a soft bristle brush to clean logs.

Page 4 - PRODUCT FEATURES

12TROUBLESHOOTING WARNING: If you smell gas: • Shut off gas supply. • Do not try to light any appliance. • Do not touch any electrical switch; do n

Page 5

13REPLACEMENT PARTSNOTE: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.PARTS UNDER W

Page 6 - INSTALLATION

14 PARTS LIST (WAN18N-2)This list contains replaceable parts for your heater. When ordering replacement parts, follow the instructions listed under Re

Page 7 - CONNECTION TO GAS SUPPLY

15PARTS LIST (WAN24N-2)This list contains replaceable parts for your heater. When ordering replacement parts, follow the instructions listed under Rep

Page 9

17WARRANTY INFORMATIONKeep This WarrantyIMPORTANT: We urge you to ll your warranty registration card within TEN(10) days of date of installation, com

Page 10 - OPERATION

2 TABLE OF CONTENTSImportant Safety Information...

Page 11 - CARE AND MAINTENANCE

3IMPORTANT SAFETY INFORMATIONIMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or service this heater.

Page 12 - TROUBLESHOOTING

4ON/OFF VALVE/SAFETY PILOT KIT AND PROPANE/LP CONVERSIONAn optional on/off valve/safety pilot kit with a piezo ignitor is available for this appliance

Page 13 - REPLACEMENT PARTS

5AIR FOR COMBUSTION AND VENTILATION WARNING: If the area in which the heater may be operated does not meet the required volume for indoor combustion a

Page 14

6INSTALLATIONVENTING SPECIFICATIONS FOR INSTALLATIONThe replace chimney ue and vent must be drafting properly. To check the vent for proper drafting

Page 15

7Fig. 5 – Connecting Gas to ApplianceInstallation and Gas Connection1. Place the burner pan assembly in the center of the replace oor. Make sure

Page 16

8CHECKING GAS CONNECTIONS WARNING: Test all gas piping and connections for leaks after installing or servicing. Correct all leaks immediately. WARNIN

Page 17 - WARRANTY INFORMATION

9INSTALLING LOGS (WAN18-2 & WAN24-2)Provided Logs: 81. Firstly put vermiculite into burn pan. Then pulling glowing ember loosely, and sp

Comments to this Manuals

No comments