This type of filter uses 12 large 40 x 40 mm cavities all with 3.5 mm
silverplated helical resonators, diameter 19 mm.
Using these large helicals and cavities means higher Q-value and
possibility of using very small spacing between pass and reject.
Using large helicals and cavities also means higher power handling - up
to 70 W with 1.5 dB insertion loss and 100 W with 1 dB insertion loss.
BPBR 4/66-HX-150 is divided into two sub-bands:
Pass 68 - 78 MHz or Pass 78 - 86.375 MHz. The reject is
in both cases 87.6 - 108 MHz. Other tuning ranges on demand.
The cavities are made of extruded aluminium, the chassis of passivated
steel. All coaxial cables are the semirigid-type and teflon is used in
connectors and cables.
The filter is coated with black vinyl to prevent corrosion.
Please specify pass and reject frequencies when ordering.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
BPBR 4/66-HX-150 200001429
SPECIFICATIONS
ELECTRICAL
MODEL BPBR 4/66-HX-150
TX/RX FREQUENCY RANGE 68 - 108 MHz
MAX. INPUT POWER 100 W @ 1 dB insertion loss
MIN. SPACING BETWEEN PASS AND
REJECT
800 kHz @ 2.4 dB insertion loss
2 MHz @ 1.6 dB insertion loss
TYPICAL INSERTION LOSS @ 800 kHz spacing: 2.4 dB
@ 1.5 MHz spacing: 2.0 dB
@ 2.0 MHz spacing: 1.6 dB
REJECTION @ 800 kHz spacing: min. 60 dB
rest of 87.5 - 108 MHz: min. 55
dB
IMPEDANCE Nom. 50 Ω
SWR ≤ 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQUENCY STABILITY Approx. 8 ppm/° C
CONNECTORS N-female
DIMENSIONS (L x W x H) 200 x 250 x 95 mm
WEIGHT Approx 2.3 kg
Comments to this Manuals