Procom CXL 2-5HD-... User Manual download pdf

CXL 2-5HD/...

Sturdy, 5 dBd Gain, Base Station Antenna for the 160 MHz

Band

DESCRIPTION

CXL 2-5HD/… is a 5 dBd, vertically polarised, omnidirectional base

station antenna.

The antenna has a bandwidth of 7 MHz. Please specify centre frequency

or duplex TX and RX when ordering.

The antenna is provided with our sturdy type “HD” mast mount, which is

a heavy-duty, multipurpose mounting bracket made of non-corrosive

aluminium. The accompanying U-bolts and fittings are made of stainless

steel.

The antenna can be mounted on mast tubes of 58 to 105 mm in outer

diameter. Further, the construction of the mount makes it possible to

lead the cable either along the inside or on the outside of the mast tube.

In designing this antenna, special emphasis has been laid on obtaining a

large bandwidth both in relation to SWR and gain. The phasing of the

radiating elements is carefully adjusted to yield maximum gain in the

horizontal plane, with the level of the sidelobes reduced to a minimum.

The antenna element is sealed in a high-quality, conical glass fibre tube

with low wind-load, which will ensure performance undisturbed in all

climates.

To substantially reduce noise caused by atmospherical discharges, all

metal parts in the antenna are DC-grounded. Consequently, the antenna

shows a DC-short across the coaxial cable.

CXL 2-5HD/… is a vibration-proof, lightweight, slim-line, corrosion-

resistant, modern style base station antenna.

ORDERING DESIGNATIONS

TYPE PRODUCT NO.

CXL 2-5HD/... 100000101

SPECIFICATIONS

ELECTRICAL

MODEL CXL 2-5HD/...

ANTENNA TYPE High-gain collinear

FREQUENCY 7 MHz wide frequency segments within the 144 - 175

MHz range. Please specify centre frequency, or duplex

TX and RX

IMPEDANCE Nom. 50 Ω

RADIATION Omnidirectional

POLARIZATION Vertical

GAIN 7 dBi 5 dBd

HALF POWER

BEAMWIDTH

18°

BANDWIDTH 7 MHz

SWR ≤ 1.5

MAX. POWER 500 W

ANTISTATIC

PROTECTION

All metal parts DC-grounded

(connector shows a DC-short)

MECHANICAL

TEMP. RANGE -30°C → +70°C

CONNECTOR N-female

WIND SURFACE 0.382 m²

WIND LOAD 483 N @ 160 km/h

BENDING TORQUE Below “HD”-bracket, at 150 km/h:

Approx. 1.27 kNm

COLOUR Marine white

MATERIALS Radome : Polyurethane-coated glass fibre

Mounting bracket : Seawater resistant aluminium,

polyester coated

TOTAL HEIGHT Approx. 6.6 m (Dep. on frequency)

WEIGHT Approx. 10 kg

MOUNTING On 58 - 105 mm dia. mast tube

MULTI-PURPOSE MOUNTING BRACKET

PLEASE NOTE

When using the CXL 2-5HD/… at windy locations where wind speeds of

more than 150 km/h can be expected, the antenna must be mounted on the

side of the mast and the top section of the glassfibre tube stabilized with a

bracket.

1 2

Summary of Contents

Page 1 - CXL 2-5HD/

CXL 2-5HD/...Sturdy, 5 dBd Gain, Base Station Antenna for the 160 MHzBandDESCRIPTIONCXL 2-5HD/… is a 5 dBd, vertically polarised, omnidirectional base

Page 2 - TYPICAL GAIN AND SWR CURVES

TYPICAL GAIN AND SWR CURVESTYPICAL RADIATION PATTERN (E-PLANE)TYPICAL RADIATION PATTERN (H-PLANE)PROCOM A/S reserve the right to amend specificationsw

Comments to this Manuals

No comments

Procom CXL 2-5HD-... User Manual

Browse online or download User Manual for Accessories communication Procom CXL 2-5HD-.... Procom CXL 2-5HD-... User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories communication Procom CXL 2-5HD-...