Procom DPF 70-6-xl... User Manual

Browse online or download User Manual for Accessories communication Procom DPF 70-6-xl.... Procom DPF 70-6-xl... User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
DPF 70/6-XL...
6-Cavity Duplexer for the 400 MHz Band
DESCRIPTION
The DPF 70/6-XL… is a 6-cavity duplex filter for duplex radiotelephones.
The DPF 70/6-XL… can be adjusted within the complete
340 - 400 MHz band. The duplexer can be supplied in four different
versions according to duplex spacing required.
See also “Ordering information” below.
The DPF 70/6-XL… is primarily intended for equipment with TX and RX
operating on single frequencies, but it can also, however with slightly
reduced data, be used where the TX and RX operate on several
channels, i.e. within a certain port bandwidth. In the last case, factory
tuning is recommended.
The filter uses full-length ¼ cavities in a compact, extruded aluminium
housing. The chassis is made of passivated steel and teflon insulation
has been applied in the coaxial cables and in the connectors.
The filter is black vinyl coated to prevent corrosion.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. DUPLEX SPACING
(MHZ)
DPF 70/6-XL - 5/7 200001838 5 - 7
DPF 70/6-XL - 7/9 200001839 7 - 9
DPF 70/6-XL - 9/13 200001840 9 - 13
DPF 70/6-XL - 13/16 200000448 13 - 16
ORDERING INFORMATION: If duplex TX and RX frequencies are stated when ordering, the duplexers
are delivered factory-adjusted. If TX and RX frequencies are not stated, the filters are delivered non-
adjusted.
SPECIFICATIONS
ELECTRICAL
MODEL DPF 70/6-XL...
TX/RX FREQUENCY 340 - 400 MHz
MAX. INPUT POWER 50 W
INSERTION LOSS TX-ANT AND ANT-RX
(at 10 MHz duplex spacing)
Single-channel tuned:
Multi-channel tuned, 2 MHz BW:
≤ 1.2 dB (typ. 1.0 dB)
≤ 1.2 dB (typ. 1.0 dB)
TX NOISE SUPPRESSION
ON RX-FREQUENCY
Single-channel tuned:
Multi-channel tuned, 2 MHz BW:
≥ 85 dB
≥ 65 dB
RX ISOLATION ON TX-FREQUENCY
Single-channel tuned:
Multi-channel tuned, 2 MHz BW:
≥ 85 dB
≥ 65 dB
IMPEDANCE Nom. 50 Ω
SWR (All ports) ≤ 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQ. STABILITY Approx. 4.5 ppm/° C
CONNECTIONS BNC-female
DIMENSIONS (L x W x H) 245 x 154 x 33 mm
WEIGHT Approx. 1123 g
TYPICAL RESPONSE CURVES @ 10 MHz SPACING
PLEASE NOTE
Special configurations of this filter type may be quoted on request. For
instance, the filter can be delivered with other connector types, or with
flying leads (RG 316 coaxial cable) terminated with connectors or for
soldering-connection.
PROCOM A/S reserve the right to amend specifications
without prior notice.
25/08/11
Page view 0
1

Summary of Contents

Page 1 - DPF 70/6-XL

DPF 70/6-XL...6-Cavity Duplexer for the 400 MHz BandDESCRIPTIONThe DPF 70/6-XL… is a 6-cavity duplex filter for duplex radiotelephones.The DPF 70/6-XL

Comments to this Manuals

No comments