Combining two transmitters or receivers on the same antenna.
Better utilization of good antenna position.
Two antennas on the same transmitter or receiver.
Combining two signal generators.
The only combining option with very small TX-TX frequency spacing.
60 W load supplied (other loads or no load as option).
ORDERING DESIGNATIONS
TYPE FREQ. RANGE PRODUCT NO.
PRO-PHY85-2-1 68 - 72 MHz 210000539
PRO-PHY85-2-2 71 - 75 MHz 210000653
PRO-PHY85-2-3 74 - 78 MHz 210000550
PRO-PHY85-2-4 77 - 81 MHz 210000589
PRO-PHY85-2-5 80 - 84 MHz 210000588
PRO-PHY85-2-6 83 - 87 MHz 210000541
SPECIFICATIONS
ELECTRICAL
FILTER TYPE Hybrid Ring Junction
FREQUENCY 66 - 88 MHz (see table)
MAX. INPUT POWER
50 W per channel
(max. 150 W with larger load)
INSERTION LOSS
< 3.4 dB @ 2 MHz BW
< 3.7 dB @ 4 MHz BW
ISOLATION TX 1-TX 2
(*see note)
> 35 dB @ 2 MHz BW
> 30 dB @ 4 MHz BW
IMPEDANCE Nom. 50 Ω
LOAD (**see note) 60 W load fitted (other ratings available)
SWR < 1.5 with all other ports terminated with 50
MECHANICAL
TEMP. RANGE –30° C → +60° C
CONNECTORS N-female (other types as option)
DIMENSIONS (L x W x H) 216 x 89(incl. conn.) x 42 mm (excl. load)
WEIGHT Approx. 700 g (excl. load)
*The isolation between the TX ports is directly dependent on the terminating
SWR on the antenna port. With an antenna load SWR = 1.5, the isolation
between the two TX ports will be reduced to 20 dB @ 5 MHz bandwidth.
**The SWR of the load’s should be < 1.1! The load should be able to
dissipate 1/2 of the total input power.
E.g.: With 50 W input in total for the two channels, the load should be able
to dissipate 50 W x 1/2 = 25 W.
Comments to this Manuals