CXL 900-1LW/… is a 0 dBd, vertically polarized, omnidirectional base
station and marine antenna, which covers the 900 MHz band in three
models.
Provided with the sturdy “LW” mast mount – a lightweight,
multipurpose, epoxy-coated mounting bracket made of non-corrosive
aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in
outer diameter.
The cable can be led either on the outside or along the inside of the
mast tube.
Large bandwidth with respect to both SWR and gain.
The carefully designed, broad-banded antenna element is sealed in a
high-quality, conical glass fibre tube with low wind-load, which will
ensure performance undisturbed by corrosive environments.
To substantially reduce noise caused by atmospherical discharges, all
metal parts in the antenna are DC-grounded. Consequently, the antenna
shows a DC-short across the coaxial cable.
The CXL 900-1LW/… is a vibration-proof, lightweight, slim-line, corrosion
resistant, modern style base station and marine antenna.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
CXL 900-1LW/l 110000103 824 – 894 MHz
CXL 900-1LW/m 110000102 870 – 950 MHz
CXL 900-1LW/h 110000098 890 – 960 MHz
SPECIFICATIONS
ELECTRICAL
MODEL CXL 900-1LW/...
ANTENNA TYPE ½ λ coaxial dipole, broad-banded
FREQUENCY Models within 824 – 960 MHz
IMPEDANCE Nom. 50 Ω
RADIATION Omnidirectional
POLARIZATION Vertical
GAIN 2 dBi 0 dBd
BANDWIDTH 70 – 80 MHz
SWR ≤ 1.5
MAX. POWER 100 W
ANTISTATIC PROTECTION All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.018 m²
WIND LOAD 23 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Seawater resistant
aluminium, epoxy-coated
Clamps: Stainless steel
TOTAL HEIGHT Approx. 490 mm
DIA. IN TOP END 13 mm
DIA. IN BOTTOM END 16 mm
WEIGHT Approx. 560 g
MOUNTING On 16 to 54 mm dia. mast tube
MULTI-PURPOSE MOUNTING BRACKET
Comments to this Manuals