Page 1 of 12 ProComm PC-100 Convenient wireless control is easily installed using a ProComm embedded control unit. The ProComm provides power
Page 10 of 12 Connector J2-5, 6, 7 This set of pins constitutes the main power connection for the ProComm. Connector J3-5, 6, 7, 8, 9, 10,
Page 11 of 12 PLACEMENT:_______________________________ The ProComm 100 is an FSK radio receiver that operates in the 902-928 MHz band. Eight chan
Page 12 of 12 Matric 2099 Hill City Road Seneca, PA 16346 814-677-0716 www.matric.com Manual ProComm v3.doc Doc No: 1
Page 2 of 12 SPECIFICATIONS:___________________________ • 8 isolated relay outputs, 120VAC, 6A, NO or NC • Additional relay cards available (8 out
Page 3 of 12 The second diagram shows the ProComm applied to a variable speed belt control system. Here the ProComm simply interfa
Page 4 of 12 CONFIGURATION:___________________________ There are three aspects of the ProComm that require configuration. • Radio Channel • Relays
Page 5 of 12 The following procedure will select the appropriate ProComm channel for use with any applicable Matric handheld transmitter. 1. Discon
Page 6 of 12 INDICATORS:______________________________ The ProComm 100 provides twelve red LEDs to indicate status and activity. The meaning of eac
Page 7 of 12 PWR This indicator is located above the J1 (TERM) connector. When illuminated with a steady red light, the PWR LED indicates that pow
Page 8 of 12 INSTALLATION:_____________________________ The ProComm unit is designed for easy panel mount installation. Refer to the drawing below
Page 9 of 12 INTERFACES:_______________________________ Antenna This BNC connector is for connection only to the provided antenna directly or via a
Comments to this Manuals