Procom WAN18N-2 Installation Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
ON/OFF VALVE/SAFETY PILOT KIT AND PROPANE/LP CONVERSION
An optional on/off valve/safety pilot kit with a piezo ignitor is available for this appliance. This system requires no matches,
batteries, or other sources to light. You must use this optional system for LP conversion.
LOCAL CODES
Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel
Gas Code
ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc. National Fire Protection Association, Inc.
1430 Broadway 1 Batterymarch Park
New York, NY 10018 Quincy, MA 02269
UNPACKING
CAUTION: Do not remove the metal data plates from the burner pan. The data plates contain important product information.
1. Remove logs, hearth kit, pan materials, and hardware from carton.
2. Remove all protective packaging applied to logs and base for shipment.
3. Check all items for any shipping damage. If damaged, promptly inform dealer where you bought the product.
PRODUCT FEATURES
Fig. 1 – Product Identication
Grate
Burner
Pan
Burner
Clamp
Burner
Manifold
Burner Inlet Fitting
Grate Steps
11. Do not burn solid fuel in the replace after installing the log set. Do not use this log set to cook food or burn paper or other
objects.
12. Log set becomes very hot when in use. Keep children and adults away from hot surface to avoid burns or clothing ignition. Log
set will remain hot for a short time after shut-down. Allow surface to cool before touching.
13. Carefully supervise young children when they are in the room with log set.
14. Do not use appliance if any part has been exposed to or under water. Immediately call a qualied service technician to inspect
the room appliance and to replace any part of the control system (if using control system) and any gas control which has been
under water.
15. To help prevent breakage, new logs must be broken-in (see Curing Logs page 11).
16. Turn log set off and let cool before servicing, installing, or repairing. Only a qualied service person should install, service, or
repair log set.
Page view 3
1 2 3 4 5 6 7 8 9 ... 16 17

Comments to this Manuals

No comments