Procom MD100TBA Installation Manual download pdf (Page 20)

www.usaprocom.com

200000-01B20

OPERATION

MANUAL LIGHTING PROCEDURE

(ALL MODELS)

1. Remove lower front panel.

2. Follow steps 1 through 5 under Lighting

Instructions, page 18 or 19.

3. With control knob pressed in, strike match.

Hold match to pilot until pilot lights.

4. Keep control knob pressed in for 30 sec-

onds after lighting pilot. After 30 seconds,

release control knob. Follow step 8 under

Lighting Instructions, page 18 or 19.

5. Replace lower front panel.

Figure 21 - Pilot Assembly

Pilot Air

Inlet Hole

Natural

Gas

Burner

Propane/LP

Gas Burner

Ignitor

Electrode

Thermocouple

Pilot Air Inlet Hole

TO TURN OFF GAS TO APPLIANCE

Shutting Off Heater

1. Turn control knob clockwise to the

OFF position.

2. Turn off all electric power to the appliance

if service is to be performed.

Shutting off burner only

(pilot stays lit)

Turn control knob clockwise to the

PILOT/IGN position.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

No comments

Procom MD100TBA Installation Manual Page 20